How to Charge SKE Crystal Plus  

How to Charge Your SKE Crystal Plus Device Safely and Properly

The SKE Crystal Plus is a sleek, rechargeable pod system designed for convenience and performance. To keep your vape running reliably, it’s important to charge it correctly. Here’s everything you need to know.

What You’ll Need:

• Your SKE Crystal Plus device

• A USB-C charging cable (not always included in the kit)

• A standard USB wall plug (max 1A recommended)

Charging Steps:

1. Plug the USB-C cable into the bottom of the device.
   The charging port is located on the underside of the Crystal Plus.

2. Connect the other end to a USB wall plug or powered USB port.
   Avoid high-output plugs like fast chargers — stick to 5V/1A for safety.

3. Wait for the LED indicator.

   • The light will turn on while charging.

   • When the light turns off, your device is fully charged.

4. Unplug once charging is complete.
   Don’t leave it charging overnight — unplug it once the battery is full.

Charging Time:

• Charging typically takes 30 to 45 minutes from empty to full, depending on the power source used.

Charging Safety Tips:

• Only use a USB-C cable and avoid using damaged or low-quality charging accessories.

• Do not charge near water or in extreme heat.

• Avoid using fast chargers or high-output adapters that could damage the battery.

• If the device feels hot while charging, unplug it immediately and let it cool.

How Often Should You Charge?

The SKE Crystal Plus features a 400mAh battery, which typically lasts a full pod (approx. 600 puffs) on a single charge.
Charge it when you notice the vapour becoming weak or the LED flashing during use.

Pro Tip:

Keep a backup pod and charging cable handy if you’re on the go — that way, you’re never caught short.