If you’re using a Lost Mary BM6000 for the first time, you might be wondering how to recharge it, how long it takes and whether you need to follow any special steps. While older Lost Mary devices were single-use and non-rechargeable, the BM6000 is fully legal in the UK because it’s refillable and rechargeable.
Recharging the device is simple once you know how it works, but there are a few things you should know to avoid damaging the battery or affecting flavour.
This guide will walk you through everything from charging tips to battery care and how to know when your Lost Mary BM6000 needs a top-up.
Why the BM6000 is rechargeable
The Lost Mary BM6000 was created as a replacement for banned disposable vapes. In the UK, all vape devices now have to be rechargeable or refillable to stay within legal limits. The BM6000 ticks both boxes.
That means instead of throwing away the device once the battery dies, you simply charge it and continue vaping. The built-in lithium battery powers the mesh coil inside the pod, helping to deliver consistent vapour and flavour right to the last drop of liquid.
What type of charger does it use?
The Lost Mary BM6000 uses a USB-C charging port, which is now standard on most modern vape kits. USB-C offers faster and more stable charging than older micro-USB cables.
Some BM6000 kits include a cable, while others don’t. If you don’t have one, any standard USB-C phone or tablet charger will work as long as it meets basic safety standards.
It’s best to avoid ultra-fast chargers meant for laptops or tablets, as these can deliver too much power and cause the device to overheat or wear down faster over time.
Where is the charging port located?
On most Lost Mary BM6000 models, the USB-C charging port is located at the base of the device. Simply flip the device over and you’ll see a small rectangular port. Plug your cable in gently. It should slide in smoothly without needing to be forced.
Make sure the port is clean and dry before plugging in. If you've spilled any e-liquid or dropped the device in water, let it fully dry before attempting to charge it.
How to recharge your Lost Mary BM6000
Here’s a step-by-step guide:
-
Plug a USB-C charging cable into a standard USB wall adapter or laptop
-
Insert the other end into the charging port at the bottom of the device
-
A small LED light should activate when charging begins
-
Leave the device to charge for 30 to 60 minutes
-
Once charged, unplug the cable and resume vaping
Most users find the BM6000 charges fully in under an hour. Some LED indicators will blink or switch off once charging is complete, but this varies slightly between batches.
If your device gets unusually hot while charging, unplug it and let it cool down. It’s normal for the body to get slightly warm, but it should never feel too hot to touch.
How often should you charge it?
This depends on how heavily you vape. Light users may only need to charge the BM6000 every couple of days. If you’re vaping regularly throughout the day, you might need to charge it once daily.
Battery life will gradually shorten over time. Like all lithium-ion batteries, the one inside the BM6000 will slowly lose capacity with regular use. This is completely normal and expected with any rechargeable vape kit.
To make your battery last longer:
-
Avoid letting it run completely flat
-
Don’t leave it plugged in overnight
-
Use a reliable power source (not a car charger or cheap adapter)
-
Keep the device out of extreme heat or cold
How to tell when it needs charging
Most BM6000 devices don’t have a screen, but they do include an LED light that acts as a battery indicator.
Signs your Lost Mary BM6000 needs a recharge:
-
The LED light flashes when you try to puff
-
You get little to no vapour
-
Flavour feels weak or inconsistent
-
The device stops responding completely
If you notice any of these signs, charge it before assuming the pod is empty. Sometimes, poor performance is simply down to low battery.
Can you use the vape while it’s charging?
It’s not recommended. While some devices support pass-through charging, most vapers prefer to let the BM6000 charge fully before using it again. Puffing during charging may cause the battery to overheat or lead to inconsistent coil performance.
To avoid damaging the pod or battery, unplug it once the charge is complete and allow the coil to settle for a minute before taking your next puff.
Charging safety tips
To keep your Lost Mary BM6000 in good condition and avoid battery issues, follow these simple tips:
-
Only use high-quality USB-C cables
-
Avoid using damaged or frayed cables
-
Don’t leave the device plugged in unattended
-
Charge on a flat, non-flammable surface
-
Never expose the battery port to water or dust
-
Stop charging immediately if the device gets too hot or smells burnt
If you need a complete overview of how to refill, recharge and maintain your device, check out our Lost Mary BM6000 Consumer Guide for full instructions.
What if your BM6000 won’t charge?
If your device isn’t charging properly, try the following:
-
Switch to a different USB-C cable or charger
-
Check for dirt or debris inside the port
-
Inspect the charging cable for visible damage
-
Gently clean the port using a dry cotton bud
-
Let the device rest at room temperature before charging again
If none of these steps work, the battery may have reached the end of its life. This can happen after extended use or repeated charge cycles. In this case, it may be time to replace the device.
Why a rechargeable vape is better
Now that disposables are banned in the UK, rechargeable devices like the BM6000 offer a better long-term experience. You get longer battery life, more consistent performance and less environmental impact.
You also save money over time. Instead of buying a new device every time the battery dies, you simply top it up and keep going. The 10ml refill bottle included with each BM6000 gives you several days of use before needing a replacement.
If you haven’t already tried one, you can browse all current flavours and styles in the Lost Mary BM6000 collection and find the version that suits your vaping routine.
Final thoughts
Recharging the Lost Mary BM6000 is quick, easy and essential to getting the most out of your device. With a simple USB-C connection, fast charge times and a reliable internal battery, the BM6000 gives you the flexibility to vape when you want without the hassle of replacements.
Stick to safe charging practices, avoid overcharging and use good quality cables to keep your device working at its best. If you take care of the battery, your flavour and performance will stay consistent from the first puff to the last.
If you're setting up your vape for the first time, you may also want how to refill Lost Mary BM6000.
If it’s not working after charging, see why is my Lost Mary not hitting but lighting up.
